Skateboard Hardware | shop online at Freedom Skateshop

Set Ascending Direction
View as Grid List

38 items

Page
per page
  1. Krux Krome Hardware 1" Allen Blue Pink
    EUR 6,50 Incl. 20 % VAT
  2. Independent Hardware 7/8" Phillips Slayer Black Red Mounting Bolts
    EUR 4,99 Incl. 20 % VAT
  3. Independent Hardware 1" Phillips Slayer Black Red Mounting Hardware
    EUR 4,99 Incl. 20 % VAT
  4. Shake Junt Beagle Rise Up Riser Hardware Combo 1.25 Inch Kreuz
    EUR 14,90 Incl. 20 % VAT
  5. Hopps 1 Inch Tough Stuff Inbus Montage Hardware Bolts
    EUR 6,90 Incl. 20 % VAT
  6. Dial Tone 1 Inch Phillips Mounting Hardware Bolts
    EUR 5,90 Incl. 20 % VAT
  7. Dial Tone 7/8 Inch Phillips Mounting Hardware Bolts
    EUR 5,90 Incl. 20 % VAT
  8. Andale Mounting Combo Hardware 7/8 Inch Black Red
    EUR 7,90 Incl. 20 % VAT
  9. Ace Mounting Hardware 1 Inch Phillips
    EUR 7,90 Incl. 20 % VAT
  10. Ace Montage Hardware 7/8 Inch Kreuz
    EUR 7,90 Incl. 20 % VAT
  11. WKND 1 Inch Phillips Mounting Hardware
    EUR 7,90 Incl. 20 % VAT
  12. WKND 7/8 Inch Phillips Mounting Hardware
    EUR 7,90 Incl. 20 % VAT
  13. WKND 1 Inch Allen Mounting Hardware
    EUR 7,90 Incl. 20 % VAT
  14. WKND 7/8 Inch Allen Mounting Hardware
    EUR 7,90 Incl. 20 % VAT
  15. Shake Junt Tyson Peterson Bolts 1" Phillips
    EUR 6,90 Incl. 20 % VAT
  16. Diamond Hella Tight Hardware 1" Phillips
    EUR 4,90 Incl. 20 % VAT
  17. Diamond Hella Tight Hardware 7/8" Phillips
    EUR 4,90 Incl. 20 % VAT
  18. Primitive Mounting Bolts Hardware Set 7/8" Allen Gold
    EUR 4,99 was EUR 6,90 Incl. 20 % VAT
  19. Shortys Silverados Bolts Kreuz 1"
    EUR 7,90 Incl. 20 % VAT
  20. Pig Neon Skewers Kreuz 1"
    EUR 6,90 Incl. 20 % VAT
  21. Pig Hardware Gold 1" Phillips
    EUR 8,90 Incl. 20 % VAT
  22. Independent Hardware 1" Kreuz Black Gold Montage Schrauben
    EUR 4,90 Incl. 20 % VAT
  23. Thunder Mounting Bolts 7/8" Inbus
    EUR 4,90 Incl. 20 % VAT
  24. Shake Junt Bolts All Green Yellow Inbus 7/8"
    EUR 5,90 Incl. 20 % VAT
Set Ascending Direction
View as Grid List

38 items

Page
per page

Hardware or mounting kits are sets with eight bolts, which are used to attach the trucks to the skateboard deck. Basically, there are no serious differences in quality between the various manufacturers. There are brands like Shake Junt or Diamond, which are dedicated exclusively to the production of hardware like griptapes and bolts and are characterized by a special product variety. Otherwise, bolts differ only in length and type of screw head. There are bolts with Allen or Phillips heads. Recently, mixed forms are also available, such as the Combi Bolts from Independent, which can be tightened and opened with an Allen key as well as with a Phillips screwdriver. Freedom Skateshop offers a wide range of bolts from the most popular brands, in all sizes and color combinations.

The most important factor when buying hardware is definitely the length of the bolts. This is usually stated in inches (1 inch=2.54 cm). If you don't use shock or riser pads, you can use 7/8 to 1 inch bolts. The advantage of using 1 inch bolts is that you won't lose the nuts immediately if the bolts loosen a bit after prolonged use. For setups with large wheels or cruisers, the use of shock or riser pads is recommended. These will raise the height of the trucks and thus reduce the risk of wheelbites. We speak of wheelbites when the wheels - for example when turning in - have contact with the deck. If too much pressure is applied to the spot, this can lead to a sudden and unpredictable stop of the wheel. To install riser or shock pads, you need slightly longer bolts, starting at 1 inch. Of course, the pads come in different sizes that you can adjust to fit your wheel size. In this case, the larger the wheels, the higher the riser pads should be. The smallest size available are 1/16 pads, which can also be mounted easily with 1 inch bolts. Since the area between board and wheel is thereby only minimally increased, it is recommended not to use wheels with over 54 mm diameter with this size. With a riser size of 1/8 you can use wheels up to 56 mm diameter under the board, the appropriate mounting kit would be 1 1/8 inch long. ¼ pads are already suitable for real cruiser boards and allow wheel diameters of 57-60 mm.

You have another question about hardware? Contact us!